|
|
Build Your Online Product Catalogs?
| Product Name: |
Competitve Price Emergency Armor Pipe Repair Wrap
|
| Supply Ability: |
80000 pieces/month |
| Related proudcts |
armor repair wrap, emargency pipe fix, armor wrapping tape, |
| Specifications |
Width: 5cm, 7.5cm, 10cm, 12.5cm, 15cm. Length: 3.6m |
| Price Term: |
FOB |
| Port of loading: |
Tianjin, China |
| Minimum Order |
1000 pieces |
| Unit Price: |
USD1.5/piece |
|
Description & Properties:
Pipe repair bandage is a fast curing tape composed of a flexible fiberglass mesh impregnated with water activated polyurethane resin.
Our pipe repair bandage uses environmental friendly materials, and mainly used for Repair Oil , Gas & Water Pipeline etc,and adheres to Metal, plaster, PVC, Copper, Rubber, Fiberglass, Concrete, Wood, Ceramic, Polyester, ect.
Core Advantages:
1. Catalyst: Water
2. Resin Makeup: Polyurethane
3. Heat Resistance: 150°C
4. Pressure: 360 PSI (2,500KPA)
5.Bonds: Copper pipe, PVC, polypipe, metal, fiberglass
6.Set Time: 20to30 minutes, sets under water
7.Chemical resistance: Most diluted chemicals and fuels
Usage:
1. Once the leaking area is identified, shut down relevant pipes or hoses immediately.
2. Prepare the surface by cleaning and roughening the pipe.
3. Put on enclosed latex gloves.
4. Apply Steel Putty to the leak site and mould.
5. Open foil pouch and immerse bandage in temperate fresh water for 10 seconds.
The entire contents must be used once the package is opened.
6. Apply around the damaged area extending up to 50mm either side of the leak toensure complete coverage.
It is important that the bandage is applied.
7.quickly as curing begins once it is taken out of the water.
8.Whilst wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together.
Continue this action during and upon completion.
For best results, manufacturers recommend the completed application should be noless than 10mm inthickness. Please referto the instructions for use on each bandage for a troubleshooting guide. |
| Company: |
Ansen Medical Technology Development Co., Ltd.
|
| Contact: |
Ms. Elsa Lee |
| Address: |
Qingsong Road |
| Postcode: |
710065 |
| Tel: |
008615229212446 |
| Fax: |
0086-29-85567533 |
| E-mail: |
|
|
|
|
Home
