86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


Ansen Medical Technology Development Co., Ltd.

Products >> High pressure fiberglass pipe repair bandage wraps

High pressure fiberglass pipe repair bandage wraps

Build Your Online Product Catalogs?



Description
Product Name: High pressure fiberglass pipe repair bandage wraps
Supply Ability: 80000 pieces/month
Related proudcts fiberglass wrap tape, pipe repair wrap,
Specifications Width: 5cm, 7.5cm, 10cm, 12.5cm, 15cm. Length: 3.6m
Price Term: FOB
Port of loading: Tianjin, China
Minimum Order 1000 pieces
Unit Price: USD1.5/piece

Description & Properties:
 Pipe repair bandage is a fast curing tape composed of a flexible fiberglass mesh impregnated with water activated polyurethane resin.
Our pipe repair bandage uses environmental friendly materials, and mainly used for Repair Oil , Gas & Water Pipeline etc,and adheres to Metal, plaster, PVC, Copper, Rubber, Fiberglass, Concrete, Wood, Ceramic, Polyester, ect.

Core Advantages:
1. Catalyst: Water 
2. Resin Makeup: Polyurethane 
3. Heat Resistance: 150°C 
4. Pressure: 360 PSI (2,500KPA)
5.Bonds: Copper pipe, PVC, polypipe, metal, fiberglass 
6.Set Time: 20to30 minutes, sets under water 
7.Chemical resistance: Most diluted chemicals and fuels

Usage:
1. Once the leaking area is identified, shut down relevant pipes or hoses immediately. 
2. Prepare the surface by cleaning and roughening the pipe.
3. Put on enclosed latex gloves. 
4. Apply Steel Putty to the leak site and mould. 
5. Open foil pouch and immerse bandage in temperate fresh water for 10 seconds. 
The entire contents must be used once the package is opened. 
6. Apply around the damaged area extending up to 50mm either side of the leak toensure complete coverage.    
It is important that the bandage is applied.
7.quickly as curing begins once it is taken out of the water.  
8.Whilst wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together. 
Continue this action during and upon completion. 
For best results, manufacturers recommend the completed application should be noless than 10mm inthickness. Please referto the instructions for use on each bandage for a troubleshooting guide.

Contact Us
Company: Ansen Medical Technology Development Co., Ltd.
Contact: Ms. Elsa Lee
Address: Qingsong Road
Postcode: 710065
Tel: 008615229212446
Fax: 0086-29-85567533
E-mail:         


Copyright© Ansen Medical Technology Development Co., Ltd. All Rights Reserved.
Tel : 008615229212446 Fax : 0086-29-85567533
Powered by 86exporter.com